资源类型

期刊论文 110

会议信息 1

会议视频 1

年份

2023 13

2022 7

2021 9

2020 6

2019 8

2018 5

2017 6

2016 3

2015 3

2014 7

2013 5

2012 5

2011 2

2010 5

2009 3

2008 9

2007 7

2005 1

2004 1

2003 1

展开 ︾

关键词

吸附 3

复合材料 3

机械性能 2

重金属废水 2

BMI树脂 1

Biological Rhythms 1

Chronobiology 1

EDI 1

S-N曲线 1

Web Service 1

X射线阻射性 1

academic exchange 1

“上限” 1

一维（1D） 1

三元乙丙橡胶 1

三流体喷嘴喷雾干燥技术 1

买得起复合材料 1

偕胺肟型螯合树脂 1

催化剂 1

展开 ︾

检索范围：

排序： 展示方式：

Cation exchange resin supported nanoscale zero-valent iron for removal of phosphorus in rainwater runoff

XIE Bangmi,ZUO Jiane,GAN Lili,LIU Fenglin,WANG Kaijun

《环境科学与工程前沿（英文）》 2014年 第8卷 第3期   页码 463-470 doi: 10.1007/s11783-013-0575-3

摘要： Self-made cation exchange resin supported nanoscale zero-valent iron (R-nZVI) was used to remove phosphorus in rainwater runoff. 80% of phosphorus in rainwater runoff from grassland was removed with an initial concentration of 0.72 mg·L phosphorus when the dosage of R-nZVI is 8 g per liter rainwater, while only 26% of phosphorus was removed when using cation exchange resin without supported nanoscale zero-valent iron under the same condition. The adsorption capacity of R-nZVI increased up to 185 times of that of the cation exchange resin at a saturated equilibrium phosphorous concentration of 0.42 mg·L . Various techniques were implemented to characterize the R-nZVI and explore the mechanism of its removal of phosphate. Scanning electron microscopy (SEM) indicated that new crystal had been formed on the surface of R-nZVI. The result from inductive coupled plasma (ICP) indicated that 2.1% of nZVI was loaded on the support material. The specific surface area was increased after the load of nanoscale zero-valent iron (nZVI), according to the measurement of BET-N method. The result of specific surface area analysis also proved that phosphorus was removed mainly through chemical adsorption process. X-ray photoelectron spectroscopy (XPS) analysis showed that the new product obtained from chemical reaction between phosphate and iron was ferrous phosphate.

关键词： nanoscale zero-valent iron(R-nZVI)     cation exchange resin     rainwater runoff     phosphorus adsorption    

HTML PDF 收藏

Preparation and characterization of EVAL hollow fiber membrane adsorbents filled with cation exchange

Fengli ZHANG, Yuzhong ZHANG, Hong LI, Guangfen LI,

《化学科学与工程前沿（英文）》 2009年 第3卷 第4期   页码 462-467 doi: 10.1007/s11705-009-0011-1

摘要： EVAL hollow fiber membrane adsorbents filled with powder D061-type cation exchange resin were prepared through dry-wet spinning process, using hydrophilic copolymer EVAL as the fiber substrate. The microstructures of the membrane adsorbents were observed, and the pure water fluxes, BSA rejection, and static adsorption capacities of membrane adsorbents for BSA were measured. The effect of the resin-filled content on membrane performance has been discussed. The results showed that EVAL hollow fiber membrane adsorbents filled with D061-type cation exchange resins had good adsorption capacity, and the adsorption capacity increased with the quantity of the resin-filled content. The static protein adsorption capacity was 77.14 mg BSA/g membrane adsorbents when D061 resin loading content was 65% at pH 4.5.

关键词： substrate     copolymer EVAL     exchange     EVAL hollow     resin-filled content    

HTML PDF 收藏

Control strategies for disinfection byproducts by ion exchange resin, nanofiltration and their sequential

《环境科学与工程前沿（英文）》 2023年 第17卷 第10期 doi: 10.1007/s11783-023-1725-x

摘要：

● Effects of AER adsorption and NF on DBP precursors, DBPs, and TOX were examined.

关键词： Disinfection byproducts     Control     Anion exchange resin     Nanofiltration     Cytotoxicity    

HTML PDF 收藏

淡水室填充阳离子交换树脂的EDI膜堆对镍离子溶液分离性能的研究

牛玉标,徐小青,赵海洋,周志军

《中国工程科学》 2014年 第16卷 第7期   页码 62-67

摘要：

采用淡水室填充阳离子交换树脂的电去离子（EDI）膜堆来处理低浓度含镍废水，考察了该EDI 膜堆用于低浓度重金属废水处理的可行性，并探讨了膜堆电压和料液流量对EDI 分离重金属离子性能的影响。结果表明，对于Ni2+浓度为50 mg/L，pH为4.5 的料液工况，操作电压为25 V，料液处理量为20 L/h 时，可保证淡水产水Ni2+浓度在2 mg/L以下，且浓缩水Ni2+浓度大于900 mg/L，电流效率达到24.2 %。

关键词： EDI     阳离子交换树脂     重金属     镍离子    

HTML PDF 收藏

Analysis of statistical thermodynamic model for binary protein adsorption equilibria on cation exchange

ZHOU Xiaopeng, SU Xueli, SUN Yan

《化学科学与工程前沿（英文）》 2007年 第1卷 第2期   页码 103-112 doi: 10.1007/s11705-007-0020-x

摘要： A study of nonlinear competitive adsorption equilibria of proteins is of fundamental importance in understanding the behavior of preparative chromatographic separation. This work describes the nonlinear binary protein adsorption equilibria on ion exchangers by the statistical thermodynamic (ST) model. The single-component and binary protein adsorption isotherms of bovine hemoglobin (Hb) and bovine serum albumin (BSA) on SP Sepharose FF were determined by batch adsorption experiments in 0.05 mol/L sodium acetate buffer at three pH values (4.5, 5.0 and 5.5) and three NaCl concentrations (0.05, 0.10 and 0.15 mol/L) at pH 5.0. The ST model was found to depict the effects of pH and ionic strength on the single-component equilibria well, with model parameters depending on the pH and ionic strength. Moreover, the ST model gave acceptable fitting to the binary adsorption data with the fitted single-component model parameters, leading to the estimation of the binary ST model parameter. The effects of pH and ionic strength on the model parameters are reasonably interpreted by the electrostatic and thermodynamic theories. Results demonstrate the availability of the ST model for describing nonlinear competitive protein adsorption equilibria in the presence of two proteins.

关键词： fundamental importance     single-component equilibria     acceptable fitting     hemoglobin     chromatographic separation    

HTML PDF 收藏

Condensation of phenol and acetone on a modified macroreticular ion exchange resin catalyst

Baohe WANG, Lili WANG, Jing ZHU, Shuang CHEN, Hao SUN

《化学科学与工程前沿（英文）》 2013年 第7卷 第2期   页码 218-225 doi: 10.1007/s11705-013-1330-9

摘要： Macroreticular ion exchange resin catalysts were prepared by suspension polymerization, and then modified by alkylmercaptoamines. The modified catalysts were characterized by N adsorption/desorption measurements, scanning electron microscopy and differential scanning calorimetry. Key factors such as the mercaptan content, the degree of crosslinking and the structures of the promoters were investigated for the synthesis of Bisphenol A (BPA). At optimal conditions, the macroreticular ion exchange resin catalysts modified by alkylmercaptoamines showed high catalytic activity and selectivity for BPA synthesis.

关键词： macroreticular ion exchange resin     catalysts     suspension polymerization     Bisphenol A    

HTML PDF 收藏

离子分离用电荷Janus结构单价选择性阳离子交换膜 Article

王文广, 张艳秋, 杨晓彬, 孙海翔, 吴亚东, 邵路

《工程（英文）》 2023年 第25卷 第6期   页码 204-213 doi: 10.1016/j.eng.2021.09.020

摘要：

单价选择性阳离子交换膜（M-CEMs）已被广泛应用于环境修复和能量收集等领域，例如，从卤水和海水中提取Na+或Li+。然而，由于膜结构和材料的限制，M-CEMs存在渗透选择性低的问题。在此，我们提出了一种简单的方法以构建具有电荷Janus结构的新型M-CEMs，该结构由荷正电的均苯三甲酸/聚乙烯亚胺选择层和荷负电的商业阳离子交换膜（CEM）组成。选择性电渗析（SED）分析结果表明，具有电荷Janus结构的M-CEMs可以有效抑制多孔阳离子交换膜中存在的阴离子迁移问题，因而使这种具有电荷Janus结构的M-CEMs具有较高的渗透选择性和总阳离子通量。与最先进的单价选择性阳离子交换膜的分离性能相比，具有电荷Janus结构的M-CEMs对于Na+/Mg2+的最高渗透选择性可以达到145.77，这超过了目前单价选择性阳离子交换膜性能的“上限”，且对于Li+/Mg2+也具有优异的渗透选择性（14.11），在离子分离领域具有巨大的应用潜力。这项研究可以为具有电荷Janus结构的M-CEMs的设计提供新的见解，并应用于不同的环境和能源领域。

关键词： 单价选择性阳离子交换膜     电荷Janus结构     选择性电渗析     渗透选择性     “上限”     离子分离    

HTML PDF 收藏

Preparation of a novel anion exchange group modified hyper-crosslinked resin for the effective adsorption

Qing ZHOU, Mengqiao WANG, Aimin LI, Chendong SHUANG, Mancheng ZHANG, Xiaohan LIU, Liuyan WU

《环境科学与工程前沿（英文）》 2013年 第7卷 第3期   页码 412-419 doi: 10.1007/s11783-013-0483-6

摘要： A novel hyper-crosslinked resin (MENQ) modified with an anion exchange group was prepared using divinylbenzene (DVB) and methyl acrylate (MA) as comonomers via four steps: suspension polymerization, post-crosslinking, ammonolysis and alkylation reactions. The obtained resin had both a high specific surface area (793.34 m ·g ) and a large exchange capacity (strong base anion exchange capacity, SEC: 0.74 mmol·g , weak base anion exchange capacity, WEC: 0.45 mmol·g ). XAD-4 was selected as an adsorbent for comparison to investigate the adsorption behavior of tetracycline (TC) and humic acid (HA) onto the adsorbents. The results revealed that MENQ could effectively remove both TC and HA. The adsorption capacity of XAD-4 for TC was similar to that of MENQ, but XAD-4 exhibited poor performance for the adsorption of HA. The adsorption isotherms of TC and HA were well-fitted with the Freundlich model, which indicated the existence of heterogeneous adsorption through cation-π bonding and π–π interactions. The optimal solution condition for the adsorption of TC was at a pH of 5–6, whereas the adsorption of HA was enhanced with increasing pH of the solution.

关键词： high surface area     adsorption     anion exchange     micropollutant     dissolved organic matters    

HTML PDF 收藏

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent

Tong Li, Ke Xiao, Bo Yang, Guilong Peng, Fenglei Liu, Liyan Tao, Siyuan Chen, Haoran Wei, Gang Yu, Shubo Deng

《环境科学与工程前沿（英文）》 2019年 第13卷 第6期 doi: 10.1007/s11783-019-1175-7

摘要： • Resin adsorption and subsequent electrodeposition were used for nickel recovery. • Treated wastewater can meet the Electroplating Pollutant Discharge Standard. • The spent resin is completely regenerated by 3 BV of 4% HCl solution. • 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.

关键词： Nickel removal     Ion exchange     Electroplating wastewater     Regeneration     Electrodeposition    

HTML PDF 收藏

Removal of dissolved oxygen from water using a Pd-resin based catalytic reactor

Wenxin SHI, Chongwei CUI, Liye ZHAO, Shuili YU, Xia YUN

《化学科学与工程前沿（英文）》 2009年 第3卷 第1期   页码 107-111 doi: 10.1007/s11705-009-0154-0

摘要： The removal of dissolved oxygen (DO) from water was studied experimentally in a Pd-resin base catalyst reactor using purified hydrogen gas as a reducing agent. The effects of various operating conditions, such as hydrogen and water flow rates, height of the catalytic resin bed, temperature, pH value and run time, on the removal of DO, had been studied extensively. The results shows that DO could be removed by the reactor from ppm to ppb levels at ambient temperature. Increases of temperature, H gas rate and the height of the catalytic resin were helpful to improve the DO removal rate. The change of pH value from 4 to 12 resulted in no effect on DO removal. Reaction time was the key factor to control the DO removal efficiency. Only when the reaction time was longer than 2.3 minutes under the experimental conditions, could a very low DO level be achieved.

关键词： dissolved oxygen     palladium     catalytic reactor     hydrogen     resin    

HTML PDF 收藏

Novel 1,2,3-triazole-based compounds: Iodo effect on their gelation behavior and cation response

Yaodong Huang, Shuxue Liu, Zhuofeng Xie, Zipei Sun, Wei Chai, Wei Jiang

《化学科学与工程前沿（英文）》 2018年 第12卷 第2期   页码 252-261 doi: 10.1007/s11705-017-1683-6

摘要： Two new series of 1,2,3-triazole derivatives, with and without iodo substitution, were synthesized and their gelation properties were measured. It was found that the iodo substitution at position 5 of triazole ring could greatly enhance the gelation ability. Scanning electron microscopy and X-ray diffraction reveal that the structures of the organogels from iodo and hydrogenous gelators are totally different. Iodo gels are selectively responsive to the stimuli of Hg , whereas hydrogenous gels can respond to Hg and Cu . Moreover, the reversible gel-sol transition of hydrogenous gels can be controlled by redox reaction or tuned with suitable chemicals. The single crystal analysis of reference compound ( ) suggests that there are intermolecular and intramolecular non-classical hydrogen bonding interactions but no π-π interaction in hydrogenous gelator. The great difference between the two series of compounds results from the iodo effect and implies the existence of halogen bonding interaction in the iodo compounds.

关键词： organogelator     1     2     3-triazole derivatives     self-assembly     halogen bonding     cation response    

HTML PDF 收藏

Heat, mass, and work exchange networks

Zhiyou CHEN, Jingtao WANG

《化学科学与工程前沿（英文）》 2012年 第6卷 第4期   页码 484-502 doi: 10.1007/s11705-012-1221-5

摘要： Heat (energy), water (mass), and work (pressure) are the most fundamental utilities for operation units in chemical plants. To reduce energy consumption and diminish environment hazards, various integration methods have been developed. The application of heat exchange networks (HENs), mass exchange networks (MENs), water allocation heat exchange networks (WAHENs) and work exchange networks (WENs) have resulted in the significant saving of energy and water. This review presents the main works related to each network. The similarities and differences of these networks are also discussed. Through comparing and discussing these different networks, this review inspires researchers to propose more efficient and convenient methods for the design of existing exchange networks and even new types of networks including multi-objective networks for the system integration in order to enhance the optimization and controllability of processes.

关键词： process system engineering     integration methods     heat exchange network     mass exchange network     work exchange network    

HTML PDF 收藏

A new regeneration approach to cation resins with aluminum salts: application of desalination by its

Zhigang LIU, Shaomin ZHU, Yansheng LI

《环境科学与工程前沿（英文）》 2012年 第6卷 第1期   页码 45-50 doi: 10.1007/s11783-010-0262-6

摘要： A novel method for the regeneration of cation exchange resins by aluminum (Al) salts was investigated in order to improve the regeneration efficiency of resins and reduce the dosage of regenerant. The influences of Al concentration and the pH of regeneration solution on resin transformation had been studied. The desalination experiments were carried out to evaluate the characteristics of the Al form resins. Experimental results showed that the regeneration rate of resins was strictly dependent on Al concentration and the pH of the solution. Compared to the conventional regeneration method, the Al form mixed bed exhibited the same desalination capability as the H form mixed bed (MB), and the total organic carbon (TOC) removal was up to 90%, clearly higher than that of the H form. Al salt solution could be utilized repeatedly to regenerate Al form resins.

关键词： aluminum (Al) form resins     desalination     mixed bed (MB)     regeneration    

HTML PDF 收藏

Impregnation of thermoplastic resin in jute fiber mat

LIU Xiaoye, DAI Gance

《化学科学与工程前沿（英文）》 2008年 第2卷 第2期   页码 145-149 doi: 10.1007/s11705-008-0030-3

摘要： Impregnation rate of thermoplastic resin (polypropylene) in jute fiber mat and influence of relative factors on impregnation were studied, aiming to develop the continuous melt impregnation technique and to investigate the effect of impregnation rate and temperature on processing conditions and mechanical properties of natural fiber mat-reinforced thermoplastics. Influence of pressure on porosity of fiber mat and effect of melt viscosity on impregnation rate were also investigated. The modified capillary rheometer was used as apparatus and experimental data were analyzed based on the one-dimension Darcy’s law. Results showed that at a given pressure, the impregnation rate is inversely proportional to melt viscosity and jute fiber mat has higher porosity than glass fiber mat. The architecture, compressibility, permeability and fiber diameter of jute fiber mat were compared with those of glass fiber mat and their effects on impregnation were discussed further. It could be seen that the average diameter of jute fiber is much bigger; the porosity of jute fiber mat is significantly higher and inner bundle impregnation does not exist in jute fiber mat. Therefore, it is not difficult to understand why the impregnation rate in jute fiber mat is 3.5 times higher and permeability is 14 times greater. Kozeny constants of jute and glass fiber mats calculated based on the capillary model are 2950 and 442, respectively.

关键词： polypropylene     diameter     influence     proportional     impregnation    

HTML PDF 收藏

TiO supported IrO for anode reversal tolerance in proton exchange membrane fuel cell

《能源前沿（英文）》 2022年 第16卷 第5期   页码 852-861 doi: 10.1007/s11708-021-0811-7

摘要： Fuel starvation can occur and cause damage to the cell when proton exchange membrane fuel cells operate under complex working conditions. In this case, carbon corrosion occurs. Oxygen evolution reaction (OER) catalysts can alleviate carbon corrosion by introducing water electrolysis at a lower potential at the anode in fuel shortage. The mixture of hydrogen oxidation reaction (HOR) and unsupported OER catalyst not only reduces the electrolysis efficiency, but also influences the initial performance of the fuel cell. Herein, Ti4O7 supported IrOx is synthesized by utilizing the surfactant-assistant method and serves as reversal tolerant components in the anode. When the cell reverse time is less than 100 min, the cell voltage of the MEA added with IrOx/Ti4O7 has almost no attenuation. Besides, the MEA has a longer reversal time (530 min) than IrOx (75 min), showing an excellent reversal tolerance. The results of electron microscopy spectroscopy show that IrOx particles have a good dispersity on the surface of Ti4O7 and IrOx/Ti4O7 particles are uniformly dispersed on the anode catalytic layer. After the stability test, the Ti4O7 support has little decay, demonstrating a high electrochemical stability. IrOx/Ti4O7 with a high dispersity has a great potential to the application on the reversal tolerance anode of the fuel cell.

关键词： proton exchange membrane fuel cell (PEMFC)     fuel starvation     cell reverse     reversal tolerance anode     oxygen evolution reaction    

HTML PDF 收藏

标题 作者 时间 类型 操作

Cation exchange resin supported nanoscale zero-valent iron for removal of phosphorus in rainwater runoff

XIE Bangmi,ZUO Jiane,GAN Lili,LIU Fenglin,WANG Kaijun

期刊论文

Preparation and characterization of EVAL hollow fiber membrane adsorbents filled with cation exchange

Fengli ZHANG, Yuzhong ZHANG, Hong LI, Guangfen LI,

期刊论文

Control strategies for disinfection byproducts by ion exchange resin, nanofiltration and their sequential

期刊论文

淡水室填充阳离子交换树脂的EDI膜堆对镍离子溶液分离性能的研究

牛玉标,徐小青,赵海洋,周志军

期刊论文

Analysis of statistical thermodynamic model for binary protein adsorption equilibria on cation exchange

ZHOU Xiaopeng, SU Xueli, SUN Yan

期刊论文

Condensation of phenol and acetone on a modified macroreticular ion exchange resin catalyst

Baohe WANG, Lili WANG, Jing ZHU, Shuang CHEN, Hao SUN

期刊论文

离子分离用电荷Janus结构单价选择性阳离子交换膜

王文广, 张艳秋, 杨晓彬, 孙海翔, 吴亚东, 邵路

期刊论文

Preparation of a novel anion exchange group modified hyper-crosslinked resin for the effective adsorption

Qing ZHOU, Mengqiao WANG, Aimin LI, Chendong SHUANG, Mancheng ZHANG, Xiaohan LIU, Liuyan WU

期刊论文

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent

Tong Li, Ke Xiao, Bo Yang, Guilong Peng, Fenglei Liu, Liyan Tao, Siyuan Chen, Haoran Wei, Gang Yu, Shubo Deng

期刊论文

Removal of dissolved oxygen from water using a Pd-resin based catalytic reactor

Wenxin SHI, Chongwei CUI, Liye ZHAO, Shuili YU, Xia YUN

期刊论文

Novel 1,2,3-triazole-based compounds: Iodo effect on their gelation behavior and cation response

Yaodong Huang, Shuxue Liu, Zhuofeng Xie, Zipei Sun, Wei Chai, Wei Jiang

期刊论文

Heat, mass, and work exchange networks

Zhiyou CHEN, Jingtao WANG

期刊论文

A new regeneration approach to cation resins with aluminum salts: application of desalination by its

Zhigang LIU, Shaomin ZHU, Yansheng LI

期刊论文

Impregnation of thermoplastic resin in jute fiber mat

LIU Xiaoye, DAI Gance

期刊论文

TiO supported IrO for anode reversal tolerance in proton exchange membrane fuel cell

期刊论文